Magnet Sensors, Cords, Brackets

Fabco-Air magnetic piston location sensors, available in both electronic and reed switch styles, also include cylinder mounting brackets and quick disconnect cord sets. Make your selection from this complete menu listing of STOCKED (linked), and available, Magnetic Sensors, Cord sets and Brackets for Pneumatic Cylinders and Slides by Fabco-Air.

Available in Round and Dovetail Profile. These slide into mating slots on the sides of the cylinder housing, clamp, or bracket and are easily positioned and locked into place with a set screw. They are offered in two styles: a quick disconnect style with a 6 inch pigtail and male connector, or a pre wired style with a 9 foot cord. Female Cord sets are available in both 3 and 4 pin configurations in 2 and 5 meter lengths.

Please see individual product catalogs for details on that product's sensors and mounting options.

Sensors
9 ft.
Cord
Part#
Quick Disc Part#
Electric
Feature
Wire
Lead
Sense
Type
Where
Used
9B49-000-031
Source, PNP, 6-24 VDC, 0.2 Amp Max, 1.0 Volt Drop
3
Elect. (LED)
4mm Round Sensor for 1/2 inch Bore Pancake
Sink, NPN, 6-24 VDC, 0.2 Amp Max, 1.0 Volt Drop
3
Elect. (LED)
Same as above
9C49-000-002
9C49-000-302
5-120V DC/AC, 0.04 Amp Max, 4 Watt Max, 2.5 Volt Drop
2
Reed Switch (LED)
4mm Round Sensor for New Global Series, GB Slides, Stopper Cyl, and Swing Clamp
9C49-000-031
Source, PNP, 6-30 VDC, 0.2 Amp Max, 6 Watt Max, 1.5 Volt Drop
3
Elect. (LED)
Same as Above
9C49-000-032
9C49-000-332
Sink, NPN, 6-30 VDC, 0.2 Amp Max, 6 Watt Max, 1.5 Volt Drop
3
Elect. (LED)
Same as Above
949-000-001
949-000-301
0-120V DC/AC, 0.5 Amp Max, 5 Watt Max, 0 Volt Drop
2
Reed Switch (No LED)
1/4 inch Dovetail Sensor for New Global Series
949-000-002
949-000-302
5-120V DC/AC, 0.03 Amp Max, 4 Watt Max, 2.0 Volt Drop
2
Reed Switch (LED)
Same as Above
Source, PNP, 6-24 VDC, 0.2 Amp Max, 0.5 Volt Drop
3
Elect. (LED)
1/4 inch dovetail Sensor for Pancake, Square 1, Pancake II and New Global Series
Sink, NPN, 6-24 VDC, 0.2 Amp Max, 0.5 Volt Drop
3
Elect. (LED)
Same as above
949-200-001
949-200-301
0-120V DC/AC, 0.5 Amp Max, 5 Watt Max, 0 Volt Drop
2
Reed Switch (No LED)
1/4 inch Dovetail Sensor with adapter for 3/8 inch Dovetail Global Series and Global 32mm Stopper Cyl
949-200-002
949-200-302
5-120V DC/AC, 0.03 Amp Max, 4 Watt Max, 2.0 Volt Drop
2
Reed Switch (LED)
Same as Above
949-200-031
949-200-331
Source, PNP, 6-24 VDC, 0.2 Amp Max, 0.5 Volt Drop
3
Elect. (LED)
Same as Above
949-200-032
949-200-332
Sink, NPN, 6-24 VDC, 0.2 Amp Max, 0.5 Volt Drop
3
Elect. (LED)
Same as above
9-2A197-1003
9-2A197-1303
5-120V DC/AC, 0.5 Amp Max, 10 Watt Max, SPST N.O., 3.5 Volt Drop
2
Reed Switch
Band Clamp required for F Series Cylinders; EG, L and S Series Slides
9-2A197-1031
9-2A197-1331
Source, PNP, 6-24 VDC, 0.5 Amp Max, 1.0 Volt Drop
3
Elect.
Same as Above
9-2A197-1032
9-2A197-1332
Sink, NPN, 6-24 VDC, 0.5 Amp Max, 1.0 Volt Drop
3
Elect.
Same as above
9-2A197-1004
9-2A197-1304
5-120V DC/AC, 0.5 Amp Max, 10 Watt Max, SPST N.O., 3.5 Volt Drop
2
Reed Switch
Tie Rod Clamp required for 1-1/8 to 3 inch bore HP and MP Cyl; NFPA Cyl (1-1/2 to 4 inch bore); SE, EZ and TS Slides
9-2A197-1033
Source, PNP, 6-24 VDC, 0.5 Amp Max, 1.0 Volt Drop
3
Elect. (No LED)
Same as Above
9-2A197-1034
9-2A197-1334
Sink, NPN, 6-24 VDC, 0.5 Amp Max, 1.0 Volt Drop
3
Elect.
Same as above
749-000-504
5-240V DC/AC, 1 Amp Max, 30 Watt Max, SPST N.O., 3.0 Volt Drop
2
Tie Rod Reed Switch
Tie Rods for 4 to 8 inch bore HP and MP Cyl; NFPA Cyl (5 to 6 inch bore); Multi-Power Air Press
749-000-031
749-000-531
Source, PNP, 6-24 VDC, 1.0 Amp Max, 0.5 Volt Drop
3
Tie Rod Elect.
Same as Above
749-000-032
749-000-532
Sink, NPN, 6-24 VDC, 1.0 Amp Max, 0.5 Volt Drop
3
Tie Rod Elect.
Same as above
749-111-004
749-111-504
5-240V DC/AC, 1 Amp Max, 30 Watt Max, SPST N.O., 3.0 Volt Drop
2
Tie Rod Reed Switch
Tie Rods for 10 to 12 inch Bore HP, MP Cyl
749-111-031
749-111-531
Source, PNP, 6-24 VDC, 1.0 Amp Max, 0.5 Volt Drop
3
Tie Rod Elect.
Same as Above
749-111-032
749-111-532
Sink, NPN, 6-24 VDC, 1.0 Amp Max, 0.5 Volt Drop
3
Tie Rod Elect.
Same as above
Cord sets
Part#
Where Used
All 8mm Quick Disconnect 3 Pin Sensors
CFC-2M-12
CFC-5M-12
749 Series Quick Disconnect Sensors
Brackets
Part#
Where Used
Band Clamp for 9-2A197-xxxx Sensors:
F Series Cylinders;
EG, L and S Series Slides
Tie Rod Clamp for 9-2A197-xxxx Sensors:
1-1/8 to 3 inch bore Hi-Power and Multi-Power Cylinders;
1-1/2 to 4 inch bore NFPA Cylinders;
SE, EZ and TS Series Slides
Tie Rod Clamp for 1/4 inch Dovetail Sensor:
3/4 to 2 inch bore Square Pancake II Cylinders
900-G00-000
Tie Rod Clamp for 1/4 inch Dovetail Sensor:
2-1/2 to 3 inch bore Square Pancake II Cylinders
900-H00-000
Tie Rod Clamp for 1/4 inch Dovetail Sensor:
4 inch bore Square Pancake II Cylinders
Band Clamp Adapter for 1/4 inch Dovetail Sensors;
F Series Cylinders
SC-1
SC-2
SC-3
SC-4
SC-5
SC-6
SC-7
SC-8
Tie Rod Adapters for 1/4 inch Dovetail Sensors;
Pancake II Cylinders
ER-XXX
Adhesive mount extrusion for 1/4 inch Dovetail Sensors

Please Note: Photo may NOT represent actual item, please refer to title and product specifications for all details.

Product Image Item Name⇓ Price

Products

Sponsors